Reprint; Reconfigure Tote - Opex Perfect Pick Cortex Operator's Manual

7. The item should return ready for a PUTAWAY, without the red exclamation
mark (Figure 4-53).

4.5.5. Reprint

This is only used for sites with labelers. It allows for the reprinting of a label at
the pick station, should the original label be unusable.

4.5.6. Reconfigure Tote

This allows you to change the tote's cell configuration from a certain cell type to
another. An example would be making a four-cell tote into a two-cell tote.
Operation
Figure 4-53: Cubing - Item ready
Perfect Pick® Cortex™ Operator Manual
OPEX Corporation
107