Starting Up The System; Launching The Perfect Pick Host Software - Opex Perfect Pick Cortex Operator's Manual

Table of Contents

4.1. Starting up the system

This chapter describes how to operation the Cortex™ system.

Note: The Perfect Pick® host software must be running in order to access the

Cortex software.

The Perfect Pick® Host software interface is described in detail in the Perfect

Pick Operator Manual. This software provides the main interface with the

system's controls. Used primarily by the OPEX technician (or qualified

personnel), the Host software is used to select and run jobs, remove/insert

iBOTs, run diagnostic tests, and view statistical reports on the machine.

The Perfect Pick Host computer will launch the Host software as part of the

system's start-up routine. If you mistakenly close the Host software, or if the

Host software does not start with the machine, you can start it manually.

1. If the Host software is not already running, double-click on the Perfect Pick

icon (Figure 4-1) on the desktop, OR click Start > Programs > OPEX >

PerfectPick to open it.

Figure 4-1: Perfect Pick HD desktop icon

Perfect Pick® Cortex™ Operator Manual

OPEX Corporation

Operation

Table of Contents

Do you have a question about the Perfect Pick Cortex and is the answer not in the manual?