Wireless configuration for Macintosh using the Brother installer application (MFC-9320CW only)
Configuration using the SES/WPS/AOSS from the control
panel menu (Automatic Wireless mode)
IMPORTANT
• If you are going to connect your Brother machine to your network, we recommend that you contact your
system administrator prior to installation.
• If you have previously configured the wireless settings of the machine, you must reset the network LAN
settings before you can configure the wireless settings again. Press Menu, 7, 0 for Network Reset,
press 1 for Reset and choose 1 for Yes to accept the change. The machine will restart automatically.
a
Plug the machine's power cord into the AC power outlet. Turn on the machine's power switch.
b
Press Menu, 7, 2, 7. Using a or b, choose On and press OK.
WLAN Enable
On
Press Stop/Exit.
c
Turn on your Macintosh.
d
Put the supplied CD-ROM into your CD-ROM drive. Double-click the MFL-Pro Suite icon on your
desktop.
e
Double-click the Utilities icon.
5
5
75