Brother DCP-9010CN Network User's Manual page 96

Wireless configuration for Macintosh using the Brother installer application (MFC-9320CW only)
m
The wizard will search for wireless networks available from your machine. Choose the Ad-hoc network
you wish to associate the printer with, and then click Next.
Note
• If the list is blank, check if the machine is within range for wireless communication. Then, click Refresh.
• If your target Ad-hoc network does not appear on the list, you can manually add it by clicking the Add
button. Check This is an Ad-hoc network and there is no access point., and then enter the
Name (SSID) and the Channel number, and then click Next.
n
If your network is not configured for Authentication and Encryption, the following screen will appear. To
continue configuration, click OK and go to p.
5
85