Configuration In Ad-Hoc Mode Using The Brother Installer Application; Before Configuring The Wireless Settings; Configure The Wireless Settings - Brother DCP-9010CN Network User's Manual

Wireless configuration for Windows
Configuration in Ad-hoc mode using the Brother Installer
application

Before configuring the wireless settings

IMPORTANT
• The following instructions will install your Brother machine in a network environment using the Brother
installer application for Windows
• You can also setup your Brother machine using the machine's control panel which we recommended. See
Configuring your machine for a wireless network (For MFC-9320CW) on page 21.
• If you have previously configured the wireless settings of the machine, you must reset the network LAN
settings before you can configure the wireless settings again. Press Menu, 7, 0 for Network Reset,
press 1 for Reset and choose 1 for Yes to accept the change. The machine will restart automatically.
• If you are using Windows
temporarily disable them. Once you are sure that you can print, configure the software settings following
the instructions.

Configure the wireless settings

a
Plug the machine's power cord into the AC power outlet. Turn on the machine's power switch.
b
Press Menu, 7, 2, 7. Using a or b, choose On and press OK.
WLAN Enable
On
Press Stop/Exit.
c
Turn on your computer.
Close any applications running before configuration.
d
Put the supplied CD-ROM into your CD-ROM drive. The opening screen will appear automatically.
If the model name screen appears, choose your machine. If the language screen appears, choose your
language.
®
using the Brother installer application (For MFC-9320CW)
®
found on the CD-ROM we have provided with the machine.
®
Firewall or a firewall function of anti-spyware or antivirus applications,
4
4
4
4
54