Brother DCP-9010CN Network User's Manual page 160
Multi-protocol on-board ethernet multi-function print server and wireless (ieee 802.11b/g) ethernet multi-function print server
Hide thumbs
Also See for DCP-9010CN:
- Service manual (598 pages) ,
- User manual (215 pages) ,
- Network user's manual (203 pages)
Table of Contents
Advertisement
Web Based Management
You can set Passive Mode to OFF or ON depending on your FTP server and network firewall configuration.
By default this setting is OFF. You can also change the port number used to access the FTP server. The
default for this setting is port 21. In most cases these two settings can remain as default.
Note
Scan to FTP is available when FTP server profiles are configured using Web Based Management.
11
149
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
