Brother DCP-9010CN Network User's Manual page 44

Configuring your machine for a wireless network (For MFC-9320CW)
i
Choose <New SSID> using a or b.
Press OK. Go to j.
Select SSID&Set
<New SSID>
j
Enter a new SSID. (For information how to type text, see Entering Text on page 229.)
Press OK.
SSID:
k
Press a or b to choose Infrastructure or Ad-hoc.
Press OK.
Do one of the following:
If you chose Infrastructure, go to l.
If you chose Ad-hoc, go to m.
Mode Select
Infrastructure
l
Choose the Authentication method using a or b, and press OK.
Auth. Select
Open System
Do one of the following:
If you chose Open System, go to step m.
If you chose Shared Key, go to step n.
If you chose WPA/WPA2-PSK, go to q.
If you chose LEAP, go to step r.
If you chose EAP-FAST/NONE, EAP-FAST/MSCHAP
1
Shown on the LCD as EAP-FAST/MSCHAPv2.
m
Choose the Encryption type, None or WEP using a or b, and press OK.
Encryption Type?
None
Do one of the following:
If you chose None, go to step t.
If you chose WEP, go to step n.
n
Choose the key option; KEY1, KEY2, KEY3, KEY4 using a or b, and press OK.
Set WEP KEY
KEY1:
If you chose the key which shows **********, go to step o.
If you chose a blank key, go to step p.
o
If you want to change the key you chose in step n, press 1 to choose Change. Go to step p.
If you want to keep the key you chose in step n, press 2 to choose Keep. Go to step t.
KEY1:***********
1.Change 2.Keep
1
or EAP-FAST/GTC, go to step q.
3
33