Confirm Your Wireless Network Setup Method; Configuration Using The Machine's Control Panel Setup Wizard To Configure Your Machine For A Wireless Network; Configuration Using The Ses/Wps Or Aoss Control Panel Menu (Automatic Wireless Mode) (Infrastructure Mode Only) - Brother DCP-9010CN Network User's Manual

Configuring your machine for a wireless network (For MFC-9320CW)

Confirm your wireless network setup method

There are four methods to configure your wireless network machine. Use the machine's control panel
(recommended), SES/WPS/AOSS from the control panel menu, the PIN Method of Wi-Fi Protected Setup or
the Brother installer application. The setup process will be different depending on your network environment.
Configuration using the machine's control panel Setup Wizard to configure
your machine for a wireless network
We recommend that you use the machine's control panel to configure your wireless network settings. By
using the control panel Setup Wizard function, you can easily connect your Brother machine to your
wireless network. You must know your wireless network settings before you proceed with this
installation. (See Using the Setup Wizard from the control panel on page 31.)
Configuration using the SES/WPS or AOSS control panel menu
(Automatic Wireless mode) (Infrastructure mode only)
If your wireless access point (A) supports either SecureEasySetup™, Wi-Fi Protected Setup (PBC
AOSS™, you can configure the machine without knowing your wireless network settings. (See Using the
SES/WPS or AOSS control panel menu to configure your machine for a wireless network (Automatic Wireless
mode) on page 35.)
1
Push Button Configuration
3
3
3
3
1
) or
28