Brother DCP-9010CN Network User's Manual page 114
Multi-protocol on-board ethernet multi-function print server and wireless (ieee 802.11b/g) ethernet multi-function print server
Hide thumbs
Also See for DCP-9010CN:
- Service manual (598 pages) ,
- User manual (215 pages) ,
- Network user's manual (203 pages)
Table of Contents
Advertisement
Control panel setup
Setup Server
SMTP Server
This field displays the node name or IP address of an SMTP mail server (outgoing E-mail server) on your
network.
(Ex, "mailhost.brothermail.net" or "192.000.000.001")
a
Press Menu.
b
Press a or b to choose Network.
Press OK.
c
Press a or b to choose E-mail/IFAX.
Press OK.
d
Press a or b to choose Setup Server.
Press OK.
e
Press a or b to choose SMTP Server.
Press OK.
f
Press a or b to choose Name or IP Address.
Press OK.
g
Enter the SMTP server address (up to 64 characters).
Press OK.
h
Press Stop/Exit.
SMTP Port
This field displays the SMTP port number (for outgoing E-mails) on your network.
a
Press Menu.
b
Press a or b to choose Network.
Press OK.
c
Press a or b to choose E-mail/IFAX.
Press OK.
d
Press a or b to choose Setup Server.
Press OK.
e
Press a or b to choose SMTP Port.
Press OK.
f
Enter the SMTP port number.
Press OK.
g
Press Stop/Exit.
6
6
6
6
103
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
