Using The Ses/Wps Or Aoss Control Panel Menu To Configure Your Machine For A Wireless Network (Automatic Wireless Mode) - Brother DCP-9010CN Network User's Manual

Configuring your machine for a wireless network (For MFC-9320CW)
Using the SES/WPS or AOSS control panel menu to configure your machine for
a wireless network (Automatic Wireless mode)
If your wireless access point/router supports either SecureEasySetup™, Wi-Fi Protected Setup (PBC
AOSS™, you can configure the machine easily without knowing your wireless network settings. Your Brother
machine has the SES/WPS/AOSS menu on the control panel. This feature automatically detects which mode
your access point uses, SecureEasySetup™, Wi-Fi Protected Setup or AOSS™. By pushing a button on the
wireless access point/router and the machine, you can setup the wireless network and security settings. See
the user's guide for your wireless access point/router for instructions on how to access one-push mode.
1
Push Button Configuration
Note
Routers or access points that support SecureEasySetup™, Wi-Fi Protected Setup or AOSS™ have the
symbols shown below.
a
Plug the machine's power cord into the AC power outlet. Turn on the machine's power switch.
b
Press Menu, 7, 2, 7. Using a or b, choose On and press OK.
Press Stop/Exit.
WLAN Enable
On
c
Press Menu, 7, 2, 3 for SES/WPS/AOSS.
This feature will automatically detect which mode (SecureEasySetup™, Wi-Fi Protected Setup or
AOSS™) your access point uses to configure your machine.
WLAN
3.SES/WPS/AOSS
Note
If your wireless access point supports Wi-Fi Protected Setup (PIN Method) and you want to configure your
machine using the PIN (Personal Identification Number) Method, see Using the PIN Method of Wi-Fi
Protected Setup on page 37.
d
The machine will search for an access point that supports SecureEasySetup™, Wi-Fi Protected Setup
or AOSS™ for 2 minutes.
Setting WLAN
e
Put your access point in the SecureEasySetup™ mode, Wi-Fi Protected Setup mode or AOSS™ mode,
depending on what is supported by your access point. Please refer to the instruction manual that came
with your access point. You will see Connecting AOSS, Connecting SES or Connecting WPS on
the LCD while the machine searches your access point.
3
1
) or
3
35