Brother DCP-9010CN Network User's Manual page 202
Multi-protocol on-board ethernet multi-function print server and wireless (ieee 802.11b/g) ethernet multi-function print server
Hide thumbs
Also See for DCP-9010CN:
- Service manual (598 pages) ,
- User manual (215 pages) ,
- Network user's manual (203 pages)
Table of Contents
Advertisement
Troubleshooting
e
If you have tried step a to step d above and it does not work, then reset the print server back to the
default factory settings and try from the initial setup again. (For information on how to reset to the default
factory settings, see Restoring the network settings to factory default on page 117.)
f
®
(For Windows
)
If the installation failed, the Firewall on your computer may be blocking the necessary network
connection to the machine. In this case, you will need to disable the Firewall on your computer and re-
install the drivers. (For how to disable the Firewall, see General problems on page 187.) If you are using
personal Firewall software, see the user's guide for your software or contact the software manufacturer.
14
191
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
