Brother DCP-9010CN Network User's Manual page 73

Wireless configuration for Windows
Note
• If you want to setup or configure additional WEP key indexes other than WEP key1, click Advanced.
• If you do not know the Authentication or Encryption settings for your network, contact your network
administrator or the manufacture of your access point/router.
• If you are using WEP and the printed Network Configuration page in step p shows Link OK in the
Wireless Link Status, but the machine is not found on your network, make sure you entered the WEP
key correctly. The WEP key is case sensitive.
p
Click Next. The settings will be sent to your machine. The settings will remain unchanged if you click
Cancel. The Network Configuration page will be printed.
Note
If you want to manually enter the IP address settings of your machine, click Change IP Address and enter
the necessary IP address settings for your network.
®
using the Brother installer application (For MFC-9320CW)
4
62