Brother DCP-9010CN Network User's Manual page 68

Wireless configuration for Windows
j
You need to temporarily change your computer's wireless settings. Follow the on-screen instructions.
Make sure you take notes on all the settings such as SSID, channel, authentication and encryption of
your computer. You will need them to return your computer back to its original wireless settings, and then
click Next.
If you want to configure your machine for the wireless network you have been using, write down your
wireless network settings before configuration.
Check and record the current wireless network settings.
Network name:(SSID, ESSID)
Communication Mode
Ad-hoc
For example:
Network name:(SSID, ESSID)
HELLO
Communication Mode
Ad-hoc
1
The WEP key is for 64-bit encrypted networks or 128-bit encrypted networks and can contain both numbers and letters. If you do not know
this information you should see the documentation provided with your access point or wireless router. This key is a 64-bit or 128-bit value
that must be entered in an ASCII or HEXADECIMAL format.
For example:
64-bit ASCII:
64-bit Hexadecimal:
128-bit ASCII:
128-bit Hexadecimal:
®
using the Brother installer application (For MFC-9320CW)
Authentication method
Open system
Authentication method
Open system
Uses 5 text characters e.g. "Hello" (this is case sensitive)
Uses 10 digits of hexadecimal data e.g. "71f2234aba"
Uses 13 text characters e.g.
"Wirelesscomms" (this is case sensitive)
Uses 26 digits of hexadecimal data
e.g."71f2234ab56cd709e5412aa3ba"
Encryption mode
1
WEP
NONE
Encryption mode
WEP
Network key
—
Network key
12345
57
4