Brother DCP-9010CN Network User's Manual page 74
Multi-protocol on-board ethernet multi-function print server and wireless (ieee 802.11b/g) ethernet multi-function print server
Hide thumbs
Also See for DCP-9010CN:
- Service manual (598 pages) ,
- User manual (215 pages) ,
- Network user's manual (203 pages)
Table of Contents
Advertisement
Wireless configuration for Windows
q
Check the printed Network Configuration page. Choose the status as it is shown in the
Wireless Link Status on the Network Configuration page. Click Next.
If your status is "Link OK.", go to step s.
If your status is "Failed To Associate", go to step r.
r
Click Finish. Wireless setup was unable to associate with a wireless network. This is probably due to
incorrect security settings. Reset the print server back to its factory default settings. (See Restoring the
network settings to factory default on page 117.) Confirm the security settings of your wireless network
and try starting from f again.
®
using the Brother installer application (For MFC-9320CW)
4
63
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
