Wps W/Pin Code (Mfc-9320Cw Wireless Network Only); Wlan Status (Mfc-9320Cw Wireless Network Only) - Brother DCP-9010CN Network User's Manual

Control panel setup

WPS w/PIN Code (MFC-9320CW wireless network only)

If your wireless access point supports Wi-Fi Protected Setup (PIN Method), you can configure the machine
easily without a computer. The PIN (Personal Identification Number) Method is one of the connection
methods developed by the Wi-Fi Alliance
to the Registrar (a device that manages the wireless LAN), you can setup the wireless network and security
settings. See the user's guide for your wireless access point/router for instructions on how to access the
Wi-Fi Protected Setup mode. (For more information, see Using the PIN Method of Wi-Fi Protected Setup
on page 37.)

WLAN Status (MFC-9320CW wireless network only)

Status
This field displays the current wireless network status; Active(11b), Active(11g),
Wired LAN Active, WLAN OFF, Connection Fail or AOSS Active.
a
Press Menu.
b
Press a or b to choose Network.
Press OK.
c
Press a or b to choose WLAN.
Press OK.
d
Press a or b to choose WLAN Status.
Press OK.
e
Press a or b to choose Status.
Press OK.
f
The current wireless network status will be displayed; Active(11b), Active(11g),
Wired LAN Active, WLAN OFF, Connection Fail or AOSS Active.
g
Press Stop/Exit.
Signal
This field displays the current wireless network signal strength; Signal:Strong, Signal:Medium,
Signal:Weak or Signal:None.
a
Press Menu.
b
Press a or b to choose Network.
Press OK.
c
Press a or b to choose WLAN.
Press OK.
d
Press a or b to choose WLAN Status.
Press OK.
®
. By inputting a PIN which is created by an Enrollee (your machine)
6
6
6
6
6
99