Installing The Service Software On Pc Hard Disk; First Time Installation Of Wintesla - Nokia NSB-7 Series Service Manual

PAMS Technical Documentation

Installing the Service Software on PC Hard Disk

The program is delivered on a diskette and is copy protected with a dongle PKD-1. It
must be present in parallel port when using Service software.
The program must be installed on the hard disk before use.
Keep the original diskette safe to enable upgrading of the program!

First time installation of WinTesla:

Do the following to make a complete WinTesla installation with support for NSB-7:
Insert the WinTesla software diskette into the floppy drive on your computer (i.e. Drive
A:)
For Windows 3.1 and 3.11:
Start Windows, type win <Enter>
Open the File manager, open Main window and start File manager.
Select the floppy drive and:
Start installation, double-click the wt_inst.exe file.
Follow the instructions on the screen. Write down the directory where WinTesla is
installed on your hard disk.
When installation has finished remove the WinTesla software disk from your floppy drive.
Insert the Dongle driver diskette into your floppy drive.
Select the floppy drive and:
Start installation, double-click the dk2wn16.exe file.
Follow the instructions on the screen.
When installation has finished remove the dongle driver software disk from your floppy
drive.
Continue with the support modules installation.
For Windows 95 and NT:
Open Microsoft Explorer, Select Start -Programs - Explorer
Select the floppy drive and:
Issue 1 06/00 ãNokia Mobile Phones Ltd.
Service Software Instructions
NSB-7
Page 9