Flash Phone - Nokia NSB-7 Series Service Manual

NSB-7
Service Software Instructions
Flash Phone... command
Activation
Alt, D,F
This command is used for flashing new software into the phone. When flashing dead
phone, user may be asked to select phone type. If more than one phone is flashed with-
out closing dialog, then user must press Check button after phone has been changed.
Selection opens the following Flash Phone dialog box. When flashing is started, waiting
windows is showed telling the user estimated flashing time. Flashing files are delivered
in product and market area specific flash packages. These packages should be unpacked
to product specific subdirectory of WinTesla directory e.g. C:\WINTESLA\NSM-X for
NSM-X flash. This directory will then contain product specific INI-file e.g. NSM-X.INI in
which different market areas and files are described.
NOTE: This is a screen sample, actual information may differ.
Dialog mode: modal
Flash Phone dialog box has following items:
Market Area group:
Page 86
Status Bar Text
Open Flash Phone dialog box.
ãNokia Mobile Phones Ltd.
PAMS Technical Documentation
Issue 1 06/00