Nsb-7 Features; Menu Bar; Product; New Command - Nokia NSB-7 Series Service Manual

PAMS Technical Documentation

NSB-7 FEATURES

Menu bar

After Sales SW's menus follow the menu structure specified in WinTesla User Interface
Specification. This specification will describe functionality that differs from WinTesla
specification.

Product

New command

Activation
Alt, P, N
Ctrl+R
If phone is changed (with same phone type only serial number is changed) phone will be
initialised to local/normal mode (selected in TESLA.INI). If phone is changed to different
phone type the current DLLs are unloaded and new ones are loaded for that phone.
If the Quick/RF Info view is open, window will be automatically updated.
If Phone Information view is open, window will be automatically updated.
NOTE: When different type of phone is changed user should select Product/New, so that
application recognises phone type change and loads correct menu.
Open... command
Activation
Alt, P, O
Phone is set to local/normal mode. If no phone is found, connection parameters (from
Configure/Busses) are displayed to user and application asks from user does (s)he want
to use that connection to flash a phone. If user selects Yes, current connection is used
and flash only menu is loaded. If user selects No, application tries next connection, if
there is one.
Issue 1 06/00
Status Bar Text
Re-scan a new phone
Status Bar Text
Force load phone specific functionality
ãNokia Mobile Phones Ltd.
Service Software Instructions
NSB-7
Page 27