Nokia NSB-7 Series Service Manual page 153

PAMS Technical Documentation
• AGC is controlled
• RX continuous mode channel is activated
RF Information window is updated
The RX value is always given as default.
Note! Function is activated immediately, Apply is not needed.
TX radio button (ALT+T):
When TX is selected, the next functions are made:
Data transmission is activated
If operation mode is continuous,
• Operation mode is set to burst
RF Information window is updated
Continuous mode radio button is disabled.
Note! Function is activated immediately, Apply is not needed.
Operation Mode group:
Continuous radio button (ALT+C):
When continuous selection is used,
synthesizer is set to constant frequency
synthesizer channel number is as given with Continuous Mode Channel selection
transmitter power is not connected
if Active Unit is RX, AGC is controlled
Note! Function is activated immediately, Apply is not needed.
Burst radio button (ALT+B):
When burst selection is used,
synthesizer is controlled by using receiving/transmission/measuring synthesizer
control sequence
Issue 1 06/00 ãNokia Mobile Phones Ltd.
Service Software Instructions
NSB-7
Page 47