Nokia NSB-7 Series Service Manual page 253

PAMS Technical Documentation
2
4
3
1
Parts can be separated.
1.
1.
Issue 1 06/00
5.
To remove the PCB from the housing,
remove the 6 screws.
6
NOTE: Picture shows the assembly order
Disassembly is in the reverse order.
5
NOTE: When assembling, use 17Ncm of
torque for the screws.
6.
Remove the PCB from B-cover.
7.
Latch and latch spring can be separated
after removal of the left A-cover fixing.
8.
1. When taking the PCB and UI module
apart, remember the snap fixings on both
sides of the LCD.
NOTE: When assembling, make sure UI and
PCB module edges are fitted also correctly.
9.
Remove the speaker from its housing.
NOTE: Always install a new speaker, the old
speaker must not be used. Handle with care
as the speaker cone can be damaged if
touched.
ãNokia Mobile Phones Ltd.
Disassembly & Troubleshooting
NSB-7
Page 5