The Battery Adapter BDC–3 is used along with an external battery capacity meter to check battery capacity. Note that Li–ion batteries have an internal protection circuit to prevent deep discharge. Product Code Battery Adapter BDC–3: 0770083 View of BDC–3 E Nokia Mobile Phones Ltd. Page 4 Issue 1 06/1999...
Note that the cable SCB–3 (0730114) is also required for charger calibration. Product Code Service Battery BBD–3: 0775071 View of BBD–3 E Nokia Mobile Phones Ltd. Page 5 Issue 1 06/1999...
The Service Battery BTD–3 is used in place of the phone’s normal battery during service, to supply a maximal operating voltage to the phone also in AMPS mode. Product Code Service Battery BTD–3: 0670280 View of BTD–3 E Nokia Mobile Phones Ltd. Page 6 Issue 1 06/1999...
DC Cable PCS–1 to the JBT–1 jig. The service cable SCH–5 can be replaced by the DAU–9P cable. Note: The nominal supply voltage for JBT–1 is +3.6 V. The supply voltage must not exceed +5.0 V. E Nokia Mobile Phones Ltd. Page 7 Issue 1 06/1999...
DC Cable PCS–1 to the JBS–19 jig. The service cable SCH–5 can be replaced by the DAU–9P cable. Note: The nominal supply voltage for JBS–19 is +3.6 V. The supply voltage must not exceed +5.0 V. E Nokia Mobile Phones Ltd. Page 8 Issue 1 06/1999...
Activation Request Form, and fax to NMP Salo to get the activation code Note2: The infra red module JLP–1 is not included in the TDF–4 sales package Product Code Security Box TDF–4: 0770106 View of TDF–4 E Nokia Mobile Phones Ltd. Page 11 Issue 1 06/1999...
Service Audio Box JBA–4 The Service Audio Box JBA–4 is used between the Service Cable SCH–5, MBUS Cable DAU–9S, and Audio Cable ADS–1. Product Code Service Audio Box JBA–4: 0770094 View of JBA–4 E Nokia Mobile Phones Ltd. Page 12 Issue 1 06/1999...
The Service Cable SCH–5 is used between the phone and Service Audio Box JBA–4 (or modular T–adapter. It is also used between the phone and the Flash Loading Adapter FLA–5. Product Code Service Cable SCH–5: 0730098 View of SCH–5 E Nokia Mobile Phones Ltd. Page 13 Issue 1 06/1999...
Audio cable is an adapter routing AF signals (MIC/EAR) from 8 pin modular connector to two BNC connectors. It is used to connect JBA–4, SCH–5, and DAU–9S. Product code Audio Cable ADS–1: 0730011 View of ADS–1 E Nokia Mobile Phones Ltd. Page 14 Issue 1 06/1999...
The Warranty cable SCH–6 is used to connect two phones, and enables transfer of data (stored numbers etc.) from one phone to another. Product Code Warranty Cable SCH–6: 0730099 View of SCH–6 E Nokia Mobile Phones Ltd. Page 15 Issue 1 06/1999...
Modular Cable XCM–1 The modular Cable XCM–1 is a standard 1m long 8–core flat cable with male modular–8 connectors in both ends. Product Code Modular Cable XMS–1 4626131 View of XMS-1 E Nokia Mobile Phones Ltd. Page 16 Issue 1 06/1999...
D15–D15 Cable AXS–5 The D15–D15 Cable AXS–5 is used to connect two 15 pin D connectors. e.g. between FLA–5 and FPS–4S. Product Code D15–D15 Cable AXS–5: 0730091 View of AXS–5 E Nokia Mobile Phones Ltd. Page 17 Issue 1 06/1999...
NSD–3 PAMS Technical Documentation Service Tools DC Cable PCC–1B The DC Cable PCC–1B is used e.g. to connect FLA–5 and TDF–4. Product Code DC Cable PCC–1B: 0770053 View of PCC–1 E Nokia Mobile Phones Ltd. Page 18 Issue 1 06/1999...
The DC Cable SCB–3 is used to connect the Service Battery to the charger connection Vin of the phone when doing the charger calibration service procedure. Product Code DC Cable SCB–3: 0730114 View of SCB–3 E Nokia Mobile Phones Ltd. Page 19 Issue 1 06/1999...
Power Cable PCS-1 The Power Cable PCS-1 is used to connect the module jigs JBT-1 and JBS-19 to an external power supply. Product Code Power Cable PCS-1: 0730012 View of PCS-1 E Nokia Mobile Phones Ltd. Page 20 Issue 1 06/1999...
Note: Typical attenuation at 900 MHz is 0.7 dB. Typical attenuation at 1800 MHz is 0.9 dB. Product Code External Antenna Cable XRC–1B: 0730128 View of XRC–1B E Nokia Mobile Phones Ltd. Page 21 Issue 1 06/1999...
The MBUS Cable DAU–9S has a modular connector, and is used with the service Audio Box JBA–4, or a modular T–adapter. Product Code MBUS Cable DAU–9S: 0730108 View of DAU–9S E Nokia Mobile Phones Ltd. Page 22 Issue 1 06/1999...
MBUS Cable DAU–9P The MBUS Cable DAU–9P has a phone system connector, and is used between the phone and external devices. Product Code MBUS Cable DAU–9P: 0730109 View of DAU–9P E Nokia Mobile Phones Ltd. Page 23 Issue 1 06/1999...
PAMS Technical Documentation Service Tools Modular T–adapter The modular T–adapter is a suitable branching unit to provide the needed parallel modular connections. Product Code Modular T–adapter: 4626134 View of Modular T–adapter E Nokia Mobile Phones Ltd. Page 24 Issue 1 06/1999...
Caution: Do not connected the PKD–1 to the serial port. You may damage your PKD–1! Product Code SW Security Device PKD–1: 0750018 View of SW Security Device E Nokia Mobile Phones Ltd. Page 25 Issue 1 06/1999...
Page 26
NSD–3 PAMS Technical Documentation Service Tools This page intentionally left blank. E Nokia Mobile Phones Ltd. Page 26 Issue 1 06/1999...