NSE/M–1/3/6
Service Software Instructions
Installing the Software on PC Hard Disk
The program is delivered on a diskette and is copy protected with a
dongle PKD–1. It must be present in parallel port when using Service
software.
The program can also be installed on the hard disk, which is recommend-
able to obtain a maximum data access rate.
Keep the original diskette safe to enable upgrading of the program !
If you plan to use PCL Start service software, you must install it before
installing Service software, see PCL Start installation instructions.
To install the new Service software program, follow the steps below:
1.
2.
3.
Page 8
insert the new Service software diskette
into drive A: of your computer
start Windows, and open File Manager
log into drive a:
start INSTALL.EXE and
install Service software to drive C:
Technical Documentation
type A: and press <Enter>
type C: and press <Enter>
Original 08/98
PAMS