Short Code Memory - Nokia NSB-7 Series Service Manual

PAMS Technical Documentation
Dialog mode: modal
User Settings dialog box has following items:
Security ID edit box:
User can change security code in ME.
Preview picture:
Shows graphical Wake up message. This picture is not available, if phone does not
support WUG.
Wake up Message Graphics edit box (read only):
Shows name of file picture file loaded. This picture is not available, if phone does not
support WUG.
Save File... button (ALT+S):
User can save user settings to file.
Load File button (ALT+L):
User can load user settings from file.
Edit... button (ALT+D):
Start Windows Paintbrush to edit loaded or saved graphical Wake up message. This
picture is not available, if phone does not support WUG.
OK button (ENTER):
Writes user settings to phone.
Cancel button (ESC):
Closes the dialog box
Short Code Memory... command
Activation
Alt, S,C
This command is used for reading, storing and modifying the SIM/ME SCM values. Before
dialog is opened number of memory places is read from phone. If phone does not have
SCM in ME Memory selection is disabled and SIM is used as default. If SIM is selected
Issue 1 06/00
Status Bar Text
Open Edit SCM dialog box.
ãNokia Mobile Phones Ltd.
Service Software Instructions
NSB-7
Page 77