Installation Of Nsb-7 Support Modules (Wintesla Already Installed) - Nokia NSB-7 Series Service Manual

NSB-7
Service Software Instructions
Start installation, double-click the wt_inst.exe file.
Follow the instructions on the screen. Write down the directory where WinTesla is
installed on your hard disk.
When installation has finished remove the WinTesla software disk from your floppy drive.
Insert the Dongle driver diskette into your floppy drive.
Select the floppy drive and:
Start installation, double-click the dk2wn32.exe file.
Follow the instructions on the screen.
When installation has finished remove the dongle driver software disk from your floppy
drive.
Continue with the support modules installation.

Installation of NSB-7 support modules (WinTesla already installed):

To install the new Service Software Program, follow the steps below:
Insert the new Service software diskette into the floppy drive on of your computer (i.e.
Drive A:)
For Windows 3.1 and 3.11:
Start Windows, type win <Enter> and open the File manager.
Open Main window and start File Manager, select the floppy drive.
Start installation, double-click the nsek13i.exe file.
Follow the instructions on the screen.
For Windows 95 and NT:
Open Microsoft Explorer, select Start -Programs- Explorer
Select the floppy drive.
Start installation, double-click the nsek13i.exe file.
Follow the instructions on the screen.
Page 10 ãNokia Mobile Phones Ltd.
PAMS Technical Documentation
Issue 1 06/00