NSB-7
Service Software Instructions
order (same order than power levels).
If the power tuning function is ended and EEPROM values are not received or EEPROM
fault is noticed, an error message is shown.
When all power coefficients have such values that they don't cause any error messages,
they can be saved. The last used tuning power is in use after exit.
The next automatic selection is made when this tuning function is ended:
Operation Mode = RX pulsed
When dialog is closed original band is selected.
Page 40
ãNokia Mobile Phones Ltd.
PAMS Technical Documentation
Issue 1 06/00