Phone Identity - Nokia NSB-7 Series Service Manual

PAMS Technical Documentation
Phone Identity... command
Activation
Alt, S,I
Function is used to edit phone identity. NOTE: product code cannot be changed with this
dialog, if product code is invalid, e.g. after EEPROM change, change product code first
with Production Data Edit. With this dialog IMEI or SIM locks may be changed in fol-
lowing manner:
current phone information is read from phone
user edits User Name (and IMEI and Product Code, if they were not read correctly
from phone. But if you have to change product code it must be done in the
Production Data edit dialog. To edit other fields than User Name and IMEI, Input
entries from FAX must be checked)
dialog information is saved to file, which is sent to secure place where actual
programming information may be constructed
programming information is received from secure place in an other file, which is
loaded to dialog
program checks input values and if they are correct programming information is
written to phone (Input values are compared with values read from phone)
Function opens Phone Identity dialog.
Dialog mode: modal
Phone Identity dialog has following items:
User Name edit box (ALT+U):
Field where user can enter user identification.
IMEI edit box (ALT+I):
Field where user can enter IMEI value. Field can contain up to 40 digits.This field is
automatically filled, if ME is connected to the PC when dialog is loaded.
Product Code edit box (ALT+P):
Field where user can enter Product Code value. This field is automatically filled, if ME
is connected to the PC when dialog is loaded. NOTE: Product code cannot be changed
with this dialog, if product code is invalid, e.g. after EEPROM change, change product
code first with Production Data Edit command.
Issue 1 06/00
Status Bar Text
Open Phone Identity dialog box for editing
ãNokia Mobile Phones Ltd.
Service Software Instructions
NSB-7
Page 69