Power Supply For Mixed Operation; Table 22: Xtr Supply Modules For Powering Xtr Sections - WAGO 750 XTR Manual

60 Connect Devices
6.5.5

Power Supply for Mixed Operation

In a node, WAGO I/O System 750 XTR and WAGO I/O System 750 products can
be used in mixed operation. The permitted environmental conditions of the node,
e.g., the temperature range, then follow the components with the least
ruggedness.
In mixed operation, it should also be noted that an XTR power supply must be
connected before an XTR section and a standard supply module before a
standard section.

Table 22: XTR Supply Modules for Powering XTR Sections

Item No.
750-601/040-000 Power Supply 24
750-602/040-000 Power Supply 24
750-606/040-000 Power Supply 24
750-610/040-000 Power Supply
750-612/040-000 Power Supply 0-230
750-613/040-000 System Power Supply
750-624/040-001 Field Supply Filter 24
750-626/040-000 Supply Filter 24 VDC
XTR sections begin with XTR supply modules exclusively!
The power jumper contacts of XTR products use a contact material different than
other WAGO I/O System 750 products.
Connecting power jumper contacts of XTR products to power jumper contacts of
non-XTR products leads to irreversible deterioration in contact characteristics in
the long run.
Therefore, start sections of XTR I/O modules with an XTR supply module.
Only connect XTR I/O modules after XTR supply modules, never otherwise.
Manual
Version 1.3.0
Description
VDC Fuse XTR
VDC XTR
VDC Diagn for Ex i
XTR Modules
24 VDC Fuse Diagn
XTR
VAC/VDC XTR
24 VDC XTR
VDC HI NC XTR
HI XTR
WAGO I/O System 750 XTR
750-xxxx/040-xxx System Manual XTR
Description
24 VDC power supply with fuse holder
24 VDC power supply
24 VDC power supply for Ex i XTR
24 VDC power supply with fuse holder
and diagnostics
0-240 VAC/DC power supply
Internal system supply
24 VDC bus power supply
24 VDC field supply with filtering
System and field supply with filtering
(24 V, 0 V), i.e., fieldbus coupler/
controller and System Power Supply
24 VDC XTR (750-613/040-000)