Snmp Security; Configuration Management; Customization Capabilities - Digi Connect Series User Manual

Digi Connect and ConnectPort TSFamily features
n
Wireless Digi Connect products provide Wi-Fi Protected Access (WPA/WPA2—/802.11i) and
Wired Equivalent Privacy (WEP) encryption (64-/128-bit). Supported WPA/WPA2—/802.11i
authentication methods include:
Supported WPA authentication methods
EAP-TLS
LEAP
(WEP only)

SNMP security

You can configure SNMP set commands to use SNMP read-only. Digi recommends changing the public
and private community names to prevent unauthorized access to the Digi device.

Configuration management

Once a Digi Connect and ConnectPort TS Family device is configured and running, you may need to
periodically perform the following configuration-management tasks:
n
Copy configurations to and from a remote host
n Perform the following on the Digi device:
Update the firmware
l
Reset the factory settings
l
Manage the device files and memory
l
Reboot the device
l
For more information on these configuration-management tasks, see Administration.

Customization capabilities

You can customize several aspects of Digi devices. For example, you can:
Digi Connect Family and ConnectPort TSFamily
PEAP
EAP-PEAP/MSCHAPv2 (both PEAPv0 and
PEAPv1)
EAP-PEAP/TLS (both PEAPv0 and PEAPv1)
EAP-PEAP/GTC(both PEAPv0 and PEAPv1)
EAP-PEAP/OTP (both PEAPv0 and PEAPv1)
EAP-PEAP/MD5-Challenge (both PEAPv0 and
PEAPv1)
Configuration management
EAP/TTLS
EAP-TTLS/EAP-MD5-
Challenge
EAP-TTLS/EAP-GTC
EAP-TTLS/EAP-OTP
EAP-TTLS/EAP-MSCHAPv2
EAP-TTLS/EAP-TLS
EAP-TTLS/MSCHAPv2
EAP-TTLS/MSCHAP
EAP-TTLS/PAP
EAP-TTLS/CHAP
17