Erase Recorder - Xylem SonTek FlowTracker2 User Manual

File
Template File
Manual Beam Flow Tracker 2
Check Beam Check File
Configuration not relevant/not
user exposed
Firmware Flow Tracker 2
Firmware File
Language Flow Tracker 2
Localization File
The management of the internal recorder is important requirement to ensure that good
data management practices are followed with regard to the following aspects,
• safe keeping of measurement files,
• discarding unwanted measurement files,
• available recorder space,
• removing hidden or corrupt files.
The internal recorder should not be used as the main storage device for safe keeping of
measurement files. It is recommended that measurements are downloaded by the end
of each day and a copy of the measurement files are stored on either a computer or
USB flash drive.
4.2.2

Erase Recorder

The Erase function allows the user to erase all Measurement, Template and Manual
Beam Check files that were stored on the internal recorder. See
that are impacted by the erase function.
a) Erase Recorder require the user to input
confirmation code "123".
b) To ERASE internal recorder,
i). Enter the confirmation code using the keypad,
ii). Press the Right Soft Key to confirm.
c) To CANCEL Erase Recorder,
i). Press the Left Soft Key.
FlowTracker2 User's Manual (January 2019)
Type Extension
.ft_beamcheck
.dat
.ft_firmware
.lang
Visible
1) Uploaded from PC.
2) Not visible or accessible in
HH by user.
1) Created and uploaded from
PC.
2) Can be deleted in HH by
pressing the Delete button
while the language is
selected.
Figure 4:5 - Erase Recorder
57
SonTek – a Xylem brand
Erase
Yes Yes
No No
No
No
for file types
Table 4.2