Add Station; Table 9:3 - Station - Properties - Xylem SonTek FlowTracker2 User Manual

Data Collection Window screen of the consists of
the following,
a) Station Management area defined in rectangle,
b) Add Station,
c) Data Collection Menu (Menu).
d) To add a station,
i). Press the Left Soft Key.
e) To select the data collection menu,
i). Press the Right Soft Key,
ii). The software will display a popup menu screen.
9.3.1.1

Add Station

Add Station function creates a station for each measurement location identified for
velocity measurements. The process separates point velocity measurements with the
same position and or different measurement locations.
Add Station screen consist of the following
parameters that are required to create a station,
a) Location X,
b) Location Y,
c) Water Depth,
d) Measurement Depth,
e) Comment.
The standard functions available for each station
type are,
f) Record GPS Location (function availability, see
GPS Station
g) To add a station or start velocity measurement,
i). Press the Right Soft Key.
h) To CANCEL add station,
i). Press the Left Soft Key.
Unique station number is assigned to each point velocity measurement. This allows the
user to perform multiple measurements at the same location without assigning a unique
number or name to differentiate between the measurements.
Properties associated with the parameters for station are defined in
Parameter
Location X
Location Y
Water Depth
FlowTracker2 User's Manual (January 2019)
Tagging).
Table 9-3 - Station - Properties
Min Max
-1000 1000
-1000 1000
0 100
Figure 9:7 - Functions Data
Figure 9:8 - Add Station
Default Decimals
empty 3
empty 3
empty 3
160
SonTek – a Xylem brand
Collection Window
Table 9:3,
Units Required
m or ft Yes
m or ft Yes
m or ft Yes