Table of Contents
Advertisement
To upload an existing template from your computer to the FlowTracker2, click
Templates > Upload to Device, and select the appropriate .ft_template file. The template
file will be added to the list of templates on your device that appears.
Templates can be either created on the Handheld device and modified on a computer, or
created through the desktop software and uploaded to the device. Please refer to
Discharge Template
Please refer to
Opening FlowTracker2 Template Files (.ft_template)
opening and editing template files.
14.6.5
Custom Localization
Custom Localization allows a user to import Language files onto the handheld device.
Please see
Run Translator
14.6.6
Disconnecting the FlowTracker2
To disconnect the FlowTracker2 from the computer, click the Disconnect button.
14.7. Opening a Data File
To view FlowTracker data files, click the View Data button to turn View Data on. The
first time this button is clicked, a dialog will appear to select a file. To open more files,
click the '+' tab shown in
The FlowTracker2 software is capable of opening the following file types:
• FlowTracker File (.ft)
• FlowTracker Beamcheck File (.ft_beamcheck)
• FlowTracker Template File (.ft_template)
FlowTracker2 User's Manual (January 2019)
for instructions on how to create a template file using the software.
for instructions on creating a Language file (.lang).
Figure
14:20. The Open File dialog
(Figure
257
SonTek – a Xylem brand
New
for instructions on
14:21) will appear.
Advertisement
Table of Contents
