Table of Contents
Advertisement
3.4.3.5
Tilt Angle Warning
The Tilt Angle Warning parameter is the maximum threshold placed on the tilt angle of
the wading rod.
a) An angle of 0° means the wading rod is vertical (as desired for an ideal mounting
position).
b) The default Tilt Angle Warning applied in FlowTracker2 is 5 degrees.
c) To change the Tilt Angle Warning,
i). Use the backspace key to clear current entry,
ii). Type in the new value using the keypad.
d) To
DISABLE
i). Use the backspace key to clear current entry until "Disabled" is displayed.
3.4.4
Discharge Settings
The Discharge Settings function contains parameters required for discharge
calculations, discharge uncertainty analysis and quality control process.
Discharge settings function is only applicable to the Discharge Mode. The General
Mode does not contain any discharge calculation or uncertainty analysis.
Discharge Settings screen includes the following
parameters,
a) Discharge Equation,
b) Discharge Uncertainty,
c) Discharge Reference,
d) Max Station Q for Warning,
e) Max Depth Change for Warning,
f) Max Spacing Change for Warning.
g) 0.6 Method Depth
h) To select a parameter,
i). Use up or down scroll arrows keys to select a
parameter,
ii). The parameter selected will be highlighted in
yellow.
i) To navigate to Template Menu,
i). Press the Left Soft Key.
Properties associated with the parameters in discharge settings are defined in
3:10,
Parameter
Max Station Q for Warning
FlowTracker2 User's Manual (January 2019)
the Tilt Angle Warning,
Table 3-10 - Discharge Settings - Properties
Min
0.01
Figure 3:14 - Discharge Settings
Max
Default
100
10
49
SonTek – a Xylem brand
Table
Units
Required
%
Yes
Advertisement
Table of Contents
