Table of Contents
Advertisement
Edit
FT
Orig.
FlowTracker2 User's Manual (January 2019)
FT2
Value
Use Point
Station #
Location
Depth
Fractional Depth
Measurement
Depth
Time
Samples
Spike
Velocity
SNR
Velocity angle
Velocity standard
error
Boundary
interference
Tilt
Correction factor
Width
Area
Mean velocity
Station
discharge
Temperature
Warnings
Comment
Station type
Velocity method
GPS Latitude
GPS Longitude
Altitude
Number of
Description
Indicates whether the station is used
in the discharge calculation. This
feature can be edited.
Station number
Station location along tag line
Depth at each station (from user input
during measurement)
Fractional depth
Actual measurement depth
Time at start of station
Number of samples in station
Number of spikes during
measurement period
Measured mean velocity
Mean SNR (all beams)
Mean velocity angle with respect to
FlowTracker probe X axis
Velocity standard error
Boundary interference quality
parameter (Best, Good, Fair, Poor)
Mean Tilt
User entered correction factor
Width of section
Area of section
Mean velocity calculated by dividing
discharge by area
Station discharge
Mean station temperature
Warnings associated with each
station. Stations with warnings are
highlighted in yellow.
Comments from user input during
measurement
Station type (OpenWater, LeftBank,
RightBank, IslandEdge, Ice)
Velocity method used
GPS Latitude if GPS fix was recorded
GPS Longitude if GPS fix was
recorded
GPS Altitude if GPS fix was recorded
GPS number of satellites if GPS fix
267
SonTek – a Xylem brand
Advertisement
Table of Contents
