Table of Contents
Advertisement
Section 4.
Utilities
4.1. System Clock
System Clock function enables the setting of the internal date and time used in the
FlowTracker2 handheld software. The main data collection processes are associated
with internal date and time stamps and it is important that the instrument date and time
are configured correctly.
System Clock screen includes the following
parameters,
a) Date,
b) Time,
c) UTC Time.
d) To change internal date and time,
i). Press the Right Soft Key to select Menu,
ii). Use up or down scroll arrows keys to select an
option,
iii). Press enter key to select the parameter
highlighted in yellow.
e) To navigate to Utilities menu,
i). Press the Left Soft Key.
The System Clock options implemented to set the internal data and time of the
FlowTracker2 handheld are the following,
• Manual Change
• Sync with GPS Time
Setting the correct date and time in the FlowTracker2 handheld is important to ensure
that the correct metadata are associated with all measurements.
4.1.1
Manual Change
Manual Change option requires the user to enter the correct date and time based on
external references.
Change System Clock screen includes the following
parameters,
a) Offset From UTC,
b) Date,
c) Time.
d) To select a parameter,
i). Use up or down scroll arrows keys to select a
parameter,
ii). The parameter selected will be highlighted in
FlowTracker2 User's Manual (January 2019)
Figure 4:1 - System Clock
Figure 4:2 - Change System
54
SonTek – a Xylem brand
Advertisement
Table of Contents
