Table of Contents
Advertisement
Universal Rod mounting bracket to connect the
handheld to the universal wading rod.
d) A mounting bracket compatible with a 20mm
universal-style wading rod is available from
SonTek.
e) Neck/shoulder strap for the handheld which fits
the threaded insert is available from SonTek.
The threaded insert can also be used to secure a user-supplied mounting bracket. The
size of the threaded insert is ¼-20. User-supplied mounting brackets should avoid
direct contact with the keypad and screen.
11.2.3
Probe Mounting Bracket
Top Setting Rod J-Bracket to connect the 2D or
2D/3D Flowtraker2 probe to the top setting wading
rod.
a) The J-Bracket is available for mounting the
probe from a top-setting wading rod. Both the
bracket and complete wading rods are
available from SonTek.
b) The J-Bracket offsets the probe to one side of
the wading rod, placing the sampling volume
closer to the wading rod, approximately 5 cm
(2 in) to one side.
c) The bracket allows the wading rod to be used
in its standard "forward" orientation.
FlowTracker2 User's Manual (January 2019)
Figure 11:6 - Universal Rod
Figure 11:7 - Top Setting Rod J-
186
SonTek – a Xylem brand
Handheld Mounting
Handheld Mounting
Bracket
Advertisement
Table of Contents
