Settings; Velocity Summary; Table 9:8 - Velocity Summary - Xylem SonTek FlowTracker2 User Manual

9.3.4.1

Settings

The Settings menu option gives the user access to the initial measurement settings that
were configured during the configuration of the general template.
Settings screen consists of the following functions for
configuring measurement settings,
a) File Properties,
b) Data Collection Settings,
c) Quality Control Settings.
d) To select a function,
i). Use the up or down arrow key to scroll through
the functions,
e) To CLOSE the settings menu,
i). Press the Left Soft Key.
The measurement settings functions supplied in the Settings option in data collection
menu are defined under
9.3.4.2

Velocity Summary

Velocity Summary from the data collection menu displays the mean velocity and other
variables measured from all completed stations. The velocity summary requires at least
one station with velocity measurements to populate the main variables in the table.
Velocity Summary screen consists of tabular
summary of velocity and other variables measured up
to specific point,
a) Velocity Summary,
b) To close the velocity summary report,
i). Press the Left Soft Key,
ii). The software will navigate to the Data
Collection Window.
Properties associated with the variables and numerical calculations performed on the
raw data collected is defined in
Variable
Average station velocity, X velocity component
Vel. X Mean
of all stations.
Minimum station velocity, X velocity
Vel. X Min
component.
Vel. X Max Maximum station velocity, X velocity
FlowTracker2 User's Manual (January 2019)
Template Functions.
.
Table 9:8
,
Table 9:8
Table 9-8 - Velocity Summary
Description
173
SonTek – a Xylem brand
Figure 9:27 - Settings Menu
Figure 9:28 - Velocity Summary
Units
m/s or ft/s
m/s or ft/s
m/s or ft/s
Decimal
4
4
4