Table of Contents
Advertisement
10.2. Handheld
The FlowTracker2 Handheld and internal sensors implemented specifications are listed
in
Table 10:2,
Hardware
Input Battery Voltage
Power
Supply
Battery
Power
Battery
Life
Power Consumption
Direct Power
(ADV Lab
Power Supply
Probe only)
Coin cell
Type
Horizontal Position
Accuracy
GPS
Frequency
Resolution
LCD
LED Backlight
Luminance
Battery Power to Probe
Direct Power to Probe
Probe
Data Transfer
Interface
Data Storage
Waterproof Rating
Physical
Handheld Dimensions
Specifications
Weight in Air
Weight in Water
Operating
Maximum operating altitude is 2000m
Altitude
FlowTracker2 User's Manual (January 2019)
Table 10-2- Handheld Specifications
8 - 12 VDC
Alkaline
8 x size AA/LR6 Alkaline batteries
8 x size AA, Panasonic, Type BK200AAB,
NiMH
1.2Vdc, 1900mAh
The use of NiMH Rechargeable Batteries is only CE certified per
IEC 62133 for FlowTracker2 part number FT2-HH-2 and above.
Only this type of NiMH rechargeable batteries with IEC 62133
approvals can be used, or else safety protection will be void.
8 x size AA
15 hours continuous use, typical settings*
*Defined as power on with screen on at 100% brightness,
ADV sensor pinging 50% of the time, GPS off, and no
sleep periods. Actual battery life will vary depending on
FT2 settings, manner of use and brand of battery.
1 W (Average)
POWER SUPPLY ASSY, 12V, 20W, 1.67A
Coin Cell type is ML2020 Manganese
Lithium
<2.5m (8.2ft)
L1 (1.575 MHz), SBAS compensation
(WAAS, EGNOS, MSAS, GAGAN)
320 X 240 TFT Trans missive
450 cd / m2
8 - 12 VDC
12 VDC
RS-232
16 GB. Up to 10k discharge measurements.
Up to 10 million velocity samples
IP-67 (1m submersible)
(L)10.4cm (4.1in); (W) 6.4cm (2.5in); (H)
23.7cm (9.3in)
0.75kg (1.65lbs)
-0.25kg (-0.55lbs)
180
SonTek – a Xylem brand
Specification
Advertisement
Table of Contents
