Table of Contents
Advertisement
3.4. Template Functions
The Template functions for Discharge and General Modes contain all the configuration
parameters required for performing velocity measurements, discharge calculation and
uncertainty analysis. The functions defined under each template contain site
information, data collection criteria, quality control parameters and measurement
methods (only for discharge mode).
Template menu consists of the following menu
options,
a) File Properties,
b) Data Collection Settings,
c) Quality Control Settings,
d) Discharge Settings (only for discharge mode),
e) Displayed Velocity Methods (only for discharge
mode).
f) To select a menu option,
i). Use up or down scroll arrows keys to select
menu option,
ii). The menu option selected will be highlighted in
yellow,
iii). Press the enter key to access the menu option.
g) To navigate to Template Screen,
i). Press the Left Soft Key.
h) To Rename or
i). Press the Right Soft Key.
ii). To select menu option, use up or down scroll
arrows keys,
iii). The menu option selected will be highlighted in
yellow,
iv). Press the enter key to access the menu option.
3.4.1
File Properties
The File Properties function contains site information applicable to the measurement
site and operator details. The file properties ensure that the required Metadata are
associated with both measurement site and data collected.
FlowTracker2 User's Manual (January 2019)
DELETE
a Template in Menu,
Figure 3:9 - Template Menu
42
SonTek – a Xylem brand
Advertisement
Table of Contents
