New File Template; New Data File - Xylem SonTek FlowTracker2 User Manual

The New File Type screen consists of the following
options,
a) Discharge,
b) General,
c) To select discharge mode,
i). Use up or down scroll arrows keys to select
Discharge and press enter key.
d) The software will Navigate to the New File
Template screen.
e) To navigate to Home menu,
i). Press the Left Soft Key.
8.1.3

New File Template

New File Template function enables the user to create a new configuration template
based on SonTek default settings or select an existing
by the user. The configuration template is based on user defined parameters that are
dependent on measurement site details, flow conditions and organizational
requirements. The configuration template selected will be assigned to the measurement
file and the parameters defined in the template will be applied during the Discharge
measurement.
The New File Template screen consists of the
following options,
a) (default), the template will be based on
SonTek default settings.
b) Configuration
"Device Configuration". A list of available
templates created by the user will be displayed
under the "(default)" option.
c) To select a template,
i). Use up or down scroll arrows keys to select
template and press enter key.
d) The software will navigate to the New Data File
screen.
e) To navigate to File Type menu,
i). Press the Left Soft Key.
8.1.4

New Data File

New Data File function enables the user to populate the measurement site and operator
details. The information entered for each parameter should be accurate as this
FlowTracker2 User's Manual (January 2019)
Templates, created under
Figure 8:2 - New File Type
Configuration Template
Figure 8:3 - New File Template
118
SonTek – a Xylem brand
created