Table of Contents
Advertisement
Section 2.
System Operation
The System Operation section describes the keypad interface, handheld software
menus and the LCD display.
2.1. On/Off Switch
The On/Off power button
rd
the keypad, 3
row from the top.
a) Start system, hold the power button until the LCD screen turns on.
b) Shutdown system, hold the power button until a message is displayed to shut
down the handheld.
c) Activate sleep mode, press the power button once shutdown.
d) Wakeup system, press any button on keypad.
It's good practice to remove the battery cartridge at the end of each workday for
inspection and charging/replacement.
If the system is not used or stored for long periods, remove the batteries to prevent
unnecessary draining and potential battery leakage.
2.2. Keypad
a)
Navigation Keys – The handheld has a number of keys
that are assigned to operate handheld software. The
following keys are available for the user to either
navigate or select options in the software,
i).
Left Soft Key
associated with the key operations and allows the
user to perform the following actions,
• return to previous menu,
• select action based on text displayed,
• restart or cancel current operation.
ii).
Right Soft Key
is associated with the key operations and allows the
user to perform the following actions,
• start a new measurement,
• accept data entry or operation,
• create new template,
• access the quality control menu.
iii). Left & Right arrow – The key allows the user to
perform the following actions,
FlowTracker2 User's Manual (January 2019)
for the FlowTracker2 can be accessed on the right side of
– The text directly above the soft key is
- The text directly above the soft key
21
SonTek – a Xylem brand
Figure 2:1 - Keypad
Layout
Advertisement
Table of Contents
