Table of Contents
Advertisement
Parameter
Measurement Depth
Comment
9.3.1.2
Delete Station
Deleting a station is performed from the Data Collection Window by selecting the
station within the viewable window.
The station delete process is not reversible and the user must ensure that the correct
station is selected. Selected station will be highlighted with a yellow background.
Delete Station is performed from the Data
Collection Window. Up to ten completed stations
will be displayed at any time,
a) To select a station,
i). Use the up or down arrow key to scroll through
the completed stations,
b) To
DELETE
a station,
i). Press the backspace key.
ii). The software will navigate to the Confirmation
screen.
Confirmation screen requests confirmation of
deleting the selected station.
a) To confirm station delete,
i). Press the Right Soft Key,
b) To
CANCEL
station delete,
i). Press the Left Soft Key,
c) The software will navigate to the Data Collection
Window.
9.3.2
Station Measurement (Wading Rod)
Station Measurement is performed at each Station based on measurement
requirements. The measurement locations can either be structured such in laboratory
environment where the position of the instrument is determined accurately or random
where velocities on channel banks are investigated. The station measurements consist
of collecting a number of different parameters and variables required by the General
mode.
FlowTracker2 User's Manual (January 2019)
Min
Max
0
100
0
250
161
Default
Decimals
empty
3
empty
Figure 9:9 - Select Station
Figure 9:10 - Confirm Delete
SonTek – a Xylem brand
Units
Required
m or ft
Yes
No
Advertisement
Table of Contents
