Stations; Table 14:4: Station Information Values Available - Xylem SonTek FlowTracker2 User Manual

14.8.2.2

Stations

The Stations tab (Figure
active view is highlighted in blue. Clicking on a different station line will highlight that
station, and its available data will be displayed. Fields in the Station tab can be edited.
For details on how to edit various parameters, please refer to
available are:
• Velocities – X,Y, (and Z, if using a 3D probe) velocities measured during a station
point measurement spanning chosen sampling period,
• SNR – mean beam SNR measured during a station point measurement spanning
chosen sampling period,
• Station information – Station information summary. Values displayed are
described in Table
be changed by using the four arrows that appear above the station information
summary table in the software.
The continuous lines displayed in the graphics are defined under the following
categories,
i). Thin continuous line represents the one second raw data,
ii). Thick continuous line represents moving average of the one second raw data.
Edit FT
Orig.
FlowTracker2 User's Manual (January 2019)
Figure 14:27. Layout of Stations Tab.
14:27) shows detailed data for each station. The station in
14:4. The number of rows and columns that are viewable can
Table 14-4: Station Information Values Available
FT2 Value
Section 14.9
Description
266
SonTek – a Xylem brand
. Plots/data