Connecting To The Flowtracker2 Handheld Adv - Xylem SonTek FlowTracker2 User Manual

SonTek – a Xylem brand
The (Figure 14:13) allows a user
Set Input Units of CSV File to Create Template Files Dialog
to define the units of the parameters populated in the CSV file. The dialog box also give
the option to "Ignore header lien in CSV file" and "Overwrite existing template files".
A new template with extension .ft_template will be created for each of the monitoring
sites populated in the CSV file. The templates will be copied to the same folder path
where the CSV file is located. To configure an existing or new template upload to
FlowTracker2 Handheld device, please refer to Uploading and Downloading Templates.

14.5. Connecting to the FlowTracker2 Handheld ADV

The FlowTracker2 Desktop Software is designed to connect to the FlowTracker2
Handheld ADV only. User will not be able to use FlowTracker2 desktop software to
connect to an Original FlowTracker Handheld ADV. User will also not be able to use the
Original FlowTracker software or SonUtils to connect to the FlowTracker2.
The FlowTracker2 Handheld ADV can connect to your PC in two ways: using a direct
USB to micro-USB connection, or using your PC's Bluetooth radio. To connect, click
on the Device button, shown in Figure 14:14. Instructions for each connection type
follow in the subsequent sections.
Figure 14:14. Connecting to FlowTracker2
FlowTracker2 User's Manual (January 2019)
250