Table of Contents
Advertisement
3. Operation
3.1 Installing the Battery
The tester has a built-in lithium ion polymer rechargeable battery. The battery cable inside battery
cabin should be disconnected for safety during transportation!
Prior to use of the instrument, the battery cables inside the battery cabin should be connected.
Pressing the key
Notice: Please use the original adaptor and connected cable of the device!
When the battery icon is full or the charge indicator turns off automatically, the battery charging is
complete
Notice: When the Charge Indicator
charged. The charging time can be extended for about 1 hour and the charging time within 12
hours will not damage the battery.
Notice: Press the key
instrument works abnormally.
3.2 Instrument connection
3.2.1 IP camera connection
Power an IP camera with an independent power supply, then connect the IP camera to the IPC tester's
LAN port. If the link indicator of the tester's LAN port is green and the data indicator flickers, it means
the IP camera and the IPC tester are communicating. If the two indicators don't flicker, check if the IP
camera is powered on and the network cable is functioning properly.
VITEK 5-in-1 CCTV TESTING MONITOR
continuously can power on or off the tester.
turns off, the battery is approximately 90%
several seconds to restore the default settings when the
Page 6
Advertisement
Table of Contents
