(1) Connect the TVI camera's video output to the IP tester's "Video IN" interface. The image will
display on the tester. The tester only comes with an HD analog input interface. There is no output
interface.
(2) Connect the HD camera or the speed dome RS485 controller cable to the tester RS485 interface.
3.3 OSD menu
Press the key
◼
Press the key
◼
Short press the key
◼
Lite mode
3.3.1
Lite mode: You can easily find corresponding apps
◼
VITEK 5-in-1 CCTV TESTING MONITOR
2 seconds to turn on
2 seconds to turn off
to enter sleep mode, press it again to wake the tester
Page 8