5）Dhcp Server; 6）Trace Route - Vitek VT-SCT-U4 Manual

（ （ 5） ） DHCP server
Click on the DHCP icon to open the DHCP server app. Select the "Start" check box at the top and make
any desired changes to the network settings. Click "Save" to start assigning dynamic IP addresses for
IP cameras and other networked devices. Click the "Refresh" button to check your Client list.
（ （ 6） ） Trace route
This is used to determine the path of the IP packet access target.
Note: Trace route testing results are only for reference, for accurate test route tracking, please use a
professional Ethernet tester.
Click on the Trace Route icon
Input tracking IP address or domain name in the Remote Host IP. Set maximum hop count, normally
the default is 30.
Click "start" to trace the goal address
VITEK 5-in-1 CCTV TESTING MONITOR
to enter trace route
Page 44