Table of Contents
Advertisement
VITEK 5-in-1 CCTV TESTING MONITOR
（ （ 7） ） Link monitor
Click the
icon to open the Link Monitor app. This app is used to see if an IP address is occupied
by other network devices. This will avoid new address conflicts
Click "Add" and enter the desired IP address. To test different network segments, click the "Settings"
icon on the main menu and go to IP Settings and make the desired changes. Once the desired IP
addresses are added to the Link Monitor list, click "Start". If the IP address status shows a check mark
the IP address is occupied. If the IP address status shows an X the IP address is available. Click "Stop"
to stop the testing.
Application:
Add an IP camera or other network device to the current network group, the new IP address must not be
Page 45
Advertisement
Table of Contents
