Table of Contents
Advertisement
VITEK 5-in-1 CCTV TESTING MONITOR
Network setting：Click "Network Set" to change the IP address. Some cameras cannot support
changing IP address, so there is no change after saving.
If there is network video input to the tester, the input image will be very clear with enlargement (as the
tester supports resolution up to 1080p). This is helpful for the installers to ensure the IP camera's
video coverage and decide the IP camera's installation site.
The image can only be enlarged on SD mode (The icon "ONVIF" is SD mode.)
Select relative function on the bottom Toolbar to operate, "Snapshot", "Record", "Photos ",
"Video playback", "Storage set", "PTZ control" etc.
Snapshot：Click "snapshot" to screenshot the image and store it to an SD card.
If you select manual storage, a dialog box appears with "Input Name", with user-defined files name (by
letter, or digit) to save in SD card, if you select "Auto- storage", the tester automatically stores the files
after snapshot.
Page 20
Advertisement
Table of Contents
