Rapid Ip Discovery; Poe Power / Dc12V 3A Power Output - Vitek VT-SCT-U4 Manual

occupied, otherwise it will result in IP conflicts and stop the equipment from working. Link monitor can
check if the new setting IP address is occupied.

3.3.11 Rapid IP Discovery

Connect the cable to tester's LAN port. Press
Click "Start" to search all IP address of connected equipment in the whole network segment.
Click "Stop" to stop.

3.3.12 PoE power / DC12V 3A power output

When the tester is turned on, the DC12V power output functions are automatically turned on.
To use the PoE Power Output function, click on the icon
"OFF".
The IP camera needs to be connected to the LAN port before you turn PoE Power on. If the IP camera
Supports PoE, the PoE power is delivered via pins 1, 2, 3, and 6 on the LAN port. The IP tester will
display "48V ON" at the top of the screen when the POE power is still on.
VITEK 5-in-1 CCTV TESTING MONITOR
to enter Rapid IP Discovery app.
and change the switch "ON" or
Page 46