Dc12V 3A Power Output - Vitek VT-SCT-U4 Manual

VITEK 5-in-1 CCTV TESTING MONITOR
Notice
a. Please make sure the cable connected to the tester's Lan port is straight-line cable and has no short
circuit, otherwise it will damage the tester
b. Before using PoE power output, please check whether the IP camera supports POE power. Otherwise
it will damage the IP camera.
c. The instrument's PoE maximum power output is 24W. If Ultra- high-power load occurs, the tester will
enter protection mode.

3.6 DC12V 3A power output

When the IP tester is turned on, the DC 12V power output is ON by default. The smaller end of the
supplied converter cable connects to the tester's DC12V/3A OUTPUT and the other end connects to the
camera's power input.
Application
Power output function is mainly used in the camera field demonstration and testing, meanwhile, for
some camera installation sites, If there is no power outlet for the adapter to power the camera, the tester
can offer temporary power for it. But we do not suggest tester supply power for a long time.
Page 63